Okay, so since I have the paint now, why not use it? I strapped on the respirator and put a coat of paint on the interior of the fuselage. I ended up using about three cans for this first coat. It didn't turn out too bad:
There are some drips that I'll probably need to sand out:
It didn't coat very evenly on the vertical surfaces. I'll have to recoat a lot of this:
The floorboards got coated with liquid drops that were shaken off the end of the nozzle while I was spraying other areas. It'll be interesting to see how these settle out, if at all.
I'll let everything cure for at least 48 hours, then come back and sand down the drips and put on another coat.
"Luke, I am your father. P.S. Buy Garmin."